Karakteristik Tanah pada Kawasan Sawah Lebar Baru Kota Bengkulu dan Aplikasinya dalam Perancangan Geoteknik Soil Characteristics in the Sawah Lebar Baru Area of Bengkulu City and Its Application in Geotechnical Design
Main Article Content
Abstract
Soil is an essential and indispensable material in civil engineering and building design, affecting various construction works. The primary function of soil is to support the construction load built on it, so the soil must be able to carry the load. Each type of soil has different characteristics, so it requires special handling, both physically and mechanically. This research aims to determine the soil's physical and mechanical properties and its application using the finite element method in the Sawah Lebar Baru area, Bengkulu City. The Sawah Lebar Baru area is currently developing a new residential area. Based on the tests conducted, the soil in the area is classified as silt with high plasticity (MH). The tests include physical tests such as moisture content, volume weight, specific gravity, grain size analysis, and Atterberg limits, as well as mechanical tests such as free compressive strength test, consolidation test, and direct shear test. The results of this study provide information on the type, characteristics, physical and mechanical properties of soil, as well as its application in geotechnical design. The foundation design test results showed that the maximum vertical load was 32,900 kN/m², and the safety factor value was 3.047 for the 0.5 m depth variation. The maximum vertical load value in the foundation with a depth variation of 0.75 m is 67,500 kN/m², and the most significant safety factor value is 5.909. For the depth variation of 1 m, the maximum vertical load value is 118,050 kN/m², and the safe factor value is 9.864.
Downloads
Article Details
[2] U. Sultan, and A. Tirtayasa, “Tinjauan Sifat Fisis Dan Mekanis Tanah (Studi Kasus Jalan Carenang KabupatenSerang ),” vol. 5, no. 2, 2016.
[3] Y. Amran and R. Sadiya, “Analisis Peningkatan Sifat Mekanis Tanah Dasar menggunakan Campuran Abu Limbah Ampas Tebu dan Semen,” Teknol. Apl. Konstr., vol. 9, no. 1, pp. 74–83, 2019, [Online]. Available: https://ojs.ummetro.ac.id/index.php/tapak/article/view/1046
[4] E. E. Hangge, D. W. Karels, and A. O. Kapitan, “Pengaruh Karakteristik Tanah Dasar Terhadap Kerusakan Perkerasan Jalan,” J. Tek. Sipil, vol. 11, no. 2, pp. 155–168, 2022.
[5] K. JASMINE, "Penambahan Natrium Benzoat Dan Kalium Sorbat Dan Kecepatan Pengadukan Sebagai Upaya Penghambatan Reaksi Inversi Pada Nira Tebu", pp. 1–19, 2014.
[6] A. Saleh and M. Anggraini, “Metoda Perbaikan Tanah Lunak Dengan Penambahan Pasir,” Pros. Semin. Nas. Pakar, pp. 2–5, 2019, doi: 10.25105/pakar.v0i0.4141.
[7] K. D. Jayanti and I. Mowidu, “Hubungan antara kadar fraksi pasir, fraksi klei, bahan oganik dan berat volume terhadap kadar air tersedia pada tanah sawah di kabupaten poso,” J. AgroPet, vol. 12, no. 1, pp. 6–10, 2019.
[8] Astrid Fadhilah, Muhammad Abdul Ghony, and Roihan Akmal, “Analisis Pengujian Berat Jenis Tanah Sampel Batu Lempung dan Batu Pasir Pada Nomor Titik Bor RA04 PT. Bukit Asam, Tbk,” J. Ilm. Tek. dan Sains, vol. 1, no. 1, pp. 19–23, 2023, doi: 10.62278/jits.v1i1.4.
[9] A. Dzunnurain dan H. K. Artati.“Hubungan kandungan butiran halus tanah dan analisa distribusi butiran tanah terhadap potensi likuefaksi,” vol. 2, no. 2, pp. 417–425, 2023.
[10] M. Faridlah, A. Tohari, and M. Iryanti, “Hubungan Parameter Sifat Magnetik Dan Sifat Keteknikan Tanah Pada Tanah Residual Vulkanik,” Wahana Fis., vol. 1, no. 1, p. 54, 2016, doi: 10.17509/wafi.v1i1.4532.
[11] H. N. Siska and Y. A. Yakin, “Karakterisasi sifat fisis dan mekanis tanah lunak di Gedebage,” J. Tek. Sipil Itenas, vol. 2, no. 4, pp. 44–55, 2016, [Online]. Available: https://ejurnal.itenas.ac.id/index.php/rekaracana/article/view/1143
[12] A. Al Hanif, “Perencanaan Timbunan dan Perbaikan Tanah dengan Menggunakan Metode Preloading dan Geotextile Encased Stone Column Pada Tanah Organik di Jalan Tol Trans Sumatera Pematang Pangggang - Kayu Agung,” pp. 1–93, 2020.
[13] R. I. Kusuma and E. Mina, “Stabilitas Tanah Dengan Menggunakan Fly Ash Dan Pengaruhnya Terhadap Nilai Kuat Tekan Bebas (Studi Kasus Jalan Raya Bojonegara, Kab. Serang),” Fondasi J. Tek. Sipil, vol. 5, no. 1, 2017, doi: 10.36055/jft.v5i1.1251.
[14] A. Putra Pratama Situmorang, O. Hendri, and M. Ikhwan Yani, “Korelasi Nilai Hasil Uji Kuat Tekan Bebas Dengan Nilai California Bearing Ratio (Cbr) Tanah Lempung,” J. Ilm. Tek. Sipil TRANSUKMA, vol. 4, no. 1, pp. 53–60, 2021, doi: 10.36277/transukma.v4i1.91.
[15] D. P. Kusumastuti and I. S. Sepriyanna, “Pengaruh Penambahan Serbuk Kaca Dan Abu Sekam Pada Tanah Lunak Berdasarkan Uji Konsolidasi,” Forum Mek., vol. 8, no. 2, pp. 63–70, 2019, doi: 10.33322/forummekanika.v8i2.882.
[16] M. A. Nusantar, “Studi Daya Dukung Pondasi Dangkal Pada Tanah,” Analisa Daya Dukung Pondasi Dangkal Pada Tanah Lempung Menggunakan Perkuatan Anyaman Bambu Dan Grid Bambu Dengan Bantu. Progr. Plaxis, vol. 2, no. 3, pp. 1–302, 2014.
[17] Y.W.B. Tarigan, R.Roesyanto, G.C.R Hasibuan, R.Subakti "Analisis Pasang Surut Air Dan Konsolidasi Belawan Phase I Dengan Plaxis 2D Dan 3D" vol. 3, no. 9, pp. 1–23, 2016.
[18] A. Waruwu and T. H. Nasution, “Analisis Penurunan Tanah Dengan Timbunan yang Diperkuat Grid Bambu dan Tiang Beton (Analysis Of Settlement Of Peat Soil With Embankment Reinforced Of Bamboo Grid And Conrete Pile),” J. Jalan Jemb., vol. 37, no. 1, pp. 15–27, 2020.
[19] G. Tampubolon, R. Roesyanto, and G. C. R. Hasibuan, “Analisis Daya Dukung & Penurunan Bored Pile 80cm di Proyek Kompleks Kantor-Apartemen dengan Metode Analitis & Elemen Hingga,” J. Syntax Admiration, vol. 5, no. 4, pp. 1249–1266, 2024, doi: 10.46799/jsa.v5i4.1102.
[20] D. Haryadi, M. Mawardi, and M. R. Razali, “Analisis Lereng Terasering Dalam Upaya Penanggulangan Longsor Metode Fellenius Dengan Program Geostudio Slope,” Inersia, J. Tek. Sipil, vol. 10, no. 2, pp. 53–60, 2019, doi: 10.33369/ijts.10.2.53-60.
[21] P.Sari, "Sifat Fisis Dan Mekanis Tanah Desa Nambuhan Kecamatan Purwodadi Kabupaten Grobongan" vol. 4, no. 1, pp. 1–23, 2016.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).