Pengaruh Bubuk Talk dan Limbah Karbit Sebagai Substitusi Filler pada Campuran AC-WC
Article Sidebar
PDF Download : 3 Times
Main Article Content
Abstract
Asphalt Concrete - Wearing Course (AC-WC) is one of the surface layers in the construction of highway flexible pavement. The composition consists of: asphalt, split stone, sand and stone ash. Asphalt serves as a filler of empty space between coarse, fine, and folder aggregates. The purpose of this study was to determine the Optimum of Asphalt Content (KAO) value used as a filler, Stability, Flow, VIM, VMA, VFA, and MQ in AC-WC asphalt mixtures using cement, talc powder and carbide waste as fillers. The uniqueness of the research on talc powder and carbide waste on AC-WC asphalt mixtures is to reduce and utilize carbide waste that is no longer used and utilize talc powder as an additional filler binder or material. Marshall testing using 6% Optimum of Asphalt Content (KAO) with variations of cement, talc powder and carbide waste of 0% Cement; 100% BTLK, 25% Cement; 75% BTLK, 50% Cement: 50% BTLK, 75% Cement; 25% BTLK, and 100% Cement; 0% BTLK. From the results of this test, it was found that a mixture of cement, talc powder and carbide waste in the ratio of 75%; 25% will improve stability, flow, VFA and MQ.
Downloads
Article Details
[2] S. T. Adi, F. Chasanah, "Pengaruh Bubuk Talk Sebagai Bahan Filler Pengganti Pada Campuran AC-WC " AJIE - Asian Journal of Innovation and Entrepreneurship, Vol. 07, Issue. 03, pp. 82-90, September 2023, e-ISSN: 2477-0574; p-ISSN: 2477-3824.
[3] S. Sukirman. 2016. Beton Aspal Campuran Panas. Bandung, Institut Teknologi Nasional, 2016.
[4] H. C. Hardiyatmo, Perancangan Perkerasan Jalan dan Penyelidikan Tanah. UGM Press, Yogyakarta, Indonesia, 2024.
[5] S. Sukirman, Perkerasan Lentur Jalan Raya. Penerbit Nova, Bandung, Indonesia, 1999.
[6] P.D. Pratiwi, D. Pratikasari, "Substitusi Filler dengan Limbah Karbit terhadap Campuran Aspal Panas Hot Rolled Sheet- Base Course (HRS-BC)", vol. 4, no. 3, pp. 519-532, Agustus 2021.
[7] S. N. Permana, D. Prasetyanto, R. Zurni, "Studi Penggunaan Limbah Las Karbit Untuk Bahan Tambah Pada Perkerasan Laston Gradasi AC-WC", Rekaracana Jurnal Online Institut Teknologi Nasional, vol. 2, no. 2, pp. 94-103, Juni 2016.
[8] ASTM C188-17 Tentang Standard Test Method for Density of Hydraulic Cement
[9] SNI 03-1970-2008 Tentang Cara Uji Berat Jenis dan. Penyerapan Air Agregat Halus. Annual Book of ASTM Standards
[10] SNI 03-1968-1990 Tentang Pengujian Analisa Saringan Agregat Halus dan Kasar
[11] SNI 06-2489-2008 Tentang Pengujian Campuran Aspal dengan Alat Marshall
[12] SNI 03-6893-2002 Tentang Pengujian Berat Jenis Maksimum Campuran Beraspal yang Tidak Dipadatkan
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).